Nissan Ghandhara Nissan Limited UD
Company Profile Financial Info Contact Info Home

Assembling Plants
Services
Guidelines/Vehicle Cars
  ::Vehicle Line-Up::
 
SP210 Bus
                      
 









Door Operating Panel:
Newly designed front and rear door operating panel, conveniently located near driver's seat.
 
Doors:
Pneumaticallyoperated wide folding doors at rear / center. Separate ladies door at front with low height steps for easy access.
 
Wide Interior:
Spaciouly designed interior for maximum capacity of seating or standing arrangement.
 
Body:
Heavy gauge hollow steel tube structure with imported steel sheet paneling. powder coated aluminumwindow frames. Elegant fiberglass moulded fronnt and rear body design.
 

Mass:    
Model SP210P SP210L
Permissible GVW
Chassis
14000 Kg
3885 Kg
14000 Kg
3800 Kg
 
Performance:  
Maximum Speed
Gradeability
115
28.2
 
Engine:  
Make & Model
Type
Numbers of cylinders
Bore * stroke
Total Piston Displacement
Max Gross Output (JIS)
Max Torque (JIS)
Max Engine Speed
Nissan Diesel Motor FE6B
4- cyclic, direct injection, water cooled, in line diesel engine.
6
108 x 126 mm (4.25 x 4.96 in.)
6925 cm3 (423cu. in.)
180 PS {132 kW} at 3000 rpm
46 kgf-m {451 N-m} at 1600 rpm
3200 rpm
 
Clutch:
Dry Single Plate, hydraulically operated clutch release mechanism with air assisted booster.
 
Transmission:
Six forward speeds and one reverse, synchromesh on 2nd to 6th gears, contact-mesh on 1st and reverse gears.
Gear Ratios 1st
2nd
3rd
4th
5th
6th
Rev.
7.173
4.304
2.459
1.541
1.000
0.790
6.536
 
Brakes:  
Service Brake (foot brake) Air over hydraulic brake, dual air line system, internal expanding leading and trailing shoe type
Parking Brake (hand brake) Mechanically operated by hand brake lever.
Additional Brake Exhaust brake.
 
Steering:
Recirculating ball screw type with hydraulic power assistance.
 
Front Axle:
Reverse Elliot "I" beam
 
Rear Axle:
Full-floating, pressed steel banjo type housing.
 
Suspension:
Semielliptic leaf spring with shock absorbers at front and rear axle, with stabilizer.
 
Chassis Frame:
Ladder type, channel section side member.
 
Tyre:  
Front:
Size:
Single / Rear :Dual
9.00 - 20 -14 PR
 
Frame: Ladder type, channel section side member.
Dimensions
Inner Reinforcment
Fuel tank capacity
316 *90 * 8mm
300* 82*8.
200 ltr.
 
Dimensions:    
Model SP210P SP210L
Wheel Base
Overall Length
Overall Width
Overall Height
Front Tread
Rear Tread
Ground Clearance

5800 mm (228.3 in.)
11330 mm (446.1 in)
2400 mm (94.5 in)
2050 mm (80.7 in)
1940 mm (76.4 in)
1810 mm (71.3 in)
250 mm (9.8 in)

5000 mm (196.9 in)
10050 mm (395.7 in)
2400 mm (94.5 in)
2050 mm (80.7 in)
1940 mm (76.4 in)
1810 mm (71.3 in)
250 mm (9.8 in)
   
 
Copyright 2004, All Rights Reserved, Developed By KalSoft TM